This article will consist of the following sections:
- A Project Summary
- Install instructions
- An Isometric Drawing
- A Bill Of Materials
This article will include links to the Release Summary, Install instructions, an Isometric Breakdown and the Bill of materials. Please see the bottom if you would like to download these files.
Project Summary
This new tire shine shield design was created to allow for easier access to the the spray manifolds. This design also reduces the maintenance time for tire shine cleaning and parts replacement. It also has the benefit of increasing the adjustability of the spray manifold to reduce the waste of detergent.
Installation Instructions
Tools Required:
- Adjustable Wrenches
- A standard size socket set
ISO Breakdown
Bill Of Materials
| QTY | Part Number | Description |
|
4 |
P-2001 |
1/4" 18-8 FLAT WASHER, SS |
| 6 | P-2002 |
3/8"-16 STAINLESS STEEL NYLOCK NUT |
| 6 | P-RX-2017 |
#10-24 STAINLESS STEEL NYLOCK NUT |
| 6 | P-SS-1043 |
3/8" 18-8 SMALL OD FLAT WASHER |
| 4 | P-SS-1121 |
1/4"-20 X 2 1/4" 18-8 STAINLESS STEEL HEX CAP SCREW |
| 6 | P-SS-1279 |
18-8 STAINLESS STEEL CAP NUT, 10-24 THREAD SIZE |
| 6 | P-SS-1280 |
1/2" HEX DRIVE FLAT SOCKET CAP SCREW, SS |
| 4 | P-SS-1281 |
BLACK-OXIDE ALLOY STEEL HEX DRIVE FLAT HEAD SCREW |
| 4 | P-SS-1282 |
18-8 STAINLESS STEEL NYLON-INSERT LOCKNUT, M5 THREAD |
| 6 | P-SS-1283 |
18-8 STAINLESS STEEL HEX DRIVE FLAT HEAD SCREW, 10-24 THREAD, 7/8" |
| 1 | P-TB-236 |
TIRE SLING SHIELD CLEAR POLYCARB |
| 4 | P-VAC-276 |
1/4"-20 18-8 SS NYLON LOCK NUT |
| 2 | P-WAT-2504 |
3/4" STAUFF CLAMP |
| 3 | P-WAT-2796 |
TIRE SHINE SHEILD HINGE |
| 2 | P-WAT-2797 |
SCREW-ON TURN LATCH |
| 2 | P-WAT-2799 |
STAINLESS STEEL LATCH SPACER FOR HINGED TIRE SHINE SHEILD |
| 1 | P-WAT-2800 |
HINGED TIRE SHINE SHIELD - STRUCTURAL SUPPORT WELDMENT FOR PLEXIGLASS |
| 3 | P-WAT-2801 |
HINGED TIRE SHINE SHEILD-HING MOUNT |
| 3 | P-WAT-2803 |
SQUARE U-BOLT 3/8"-16 THREAD, 3" INSIDE WIDTH, 4-5/8" HIGH, SS |